Your pressure washer is acting up, and you may be unsure why. There may be a host of different reasons why your pressure washer isn’t performing as it should be, but you can likely alleviate your worries with a little effort and maybe even avoid power washer repairs in Columbus, GA. Use these tips to help you diagnose simple problems with your power washer that will have you up and running again no time:
- No power: If your power washer has no power coming from it, it may just be simple operator error. You need to check the power supply, as it might not be plugged in or, in the case of a gas-powered power washer, it may be out of gas. Before you panic and think you are in need of power washer repairs in Columbus, GA, check the power source.
- Low water flow: You may have water, but it is not flowing out of the power washer as it should. Try checking the water source. It may not be rated to the right specification for your power washer. A simple check of the owner’s manual and you should be able to avoid costly power washer repairs in Columbus, GA.
- Dirt buildup: When dirt builds up on a power washer, it can impact the hoses. This can cause them to get plugged and not allow fluid through as they should. When you notice a buildup of dirt on your power washer, try inspecting the hoses to make sure they are free of obstruction. This can save you from power washer repairs in Columbus, GA and, with a simple flush, allow you to use your pressure washer again.
- Reduced performance: If you notice your power washer has degraded in performance, don’t immediately think the worst, as it could be a buildup of dirt on the valves and O-rings. This can prevent your pressure washer from operating correctly, and with a little cleaning of these components, you can likely get your power washer operating like new again. This simple tip can save you on having power washer repairs in Columbus, GA, as you will be able to fix you pressure washer with a little elbow grease rather than some high-dollar parts.
- Obstructions: If you notice that something is obstructing the water from coming out of your pressure washer, the fix is relatively simple to handle. You may have a kinked hose, or there may be dirt in the nozzle. By checking these two items first, you will save yourself a lot of headache and money.
- Leaks: You notice that water is leaking, but you aren’t sure where it is coming from. Don’t panic, though, as the most likely source is a hose or the gun. Try cleaning them first, and if the leak persists, you may need to get replacement parts or have power washer repairs in Columbus, GA.
By using these simple tips, you can avoid having unnecessary power washer repairs in Columbus, GA and save yourself some money in the process. For all your power washer needs, visit Valley Hotsy. We have a range of power washing equipment for purchase and rental, and also offer service and repairs.